Description

This product is retired.

UCE-DSO210 3.2″ TFT Digital Oscilloscope, 10Msps, 2 Ch + probe with DIY Transparent Acrylic Case.

UCE-DSO210 is 2-Channel 10Msps Oscilloscope to perform electronics maintenance, electronic engineering tasks, etc.

Features:

• Display: 3.2 inch 320×240 pixel color LCD
• Personalisation: customization of display colors
• Two channel (BNC connector)
• XY Mode
• Analog Bandwidth: 2MHz
• Maximum sampling rate: 10Msps 12-bit
• Sampling depth: 8192pts (4096pts per channel)
• Input impedance: 1MΩ
• Vertical sensitivity: 50mV/div~20V/div
• Horizontal sensitivity: 1.25us/div~500ms/div
• Max input voltage: ±10V (X1 Probe), ±100V (X10 Probe)
• Supply voltage: 5V (mini USB)
• Trig modes: Run, single, Hold functions
• Trigger functions: rising / falling edge, Triggering Cursor
• Auto Measurement: frequency, ton time, toff time, period time, peak-to-peak voltage, mean voltage, RMS voltage
• Test signal: 1KHz %50 duty-cycle square wave, 3.3Vpp
• Cursor: differential measurement for time and voltage
• FFT analyze: 512 points FFT analyze, THD calculation (input: CH-A)
• Signal generator: sinus, sinC, square, triangle, sawteeth, arbitrary (0~3.3V, output: CH-A)
• PC connection: no driver required (USB HID protocol)
• PC software
• Firmware upgrade (bootload)
• Menu language: English

Package List: 

• 1 pc UCE-DSO210 3.2″ TFT Digital Oscilloscope
• 1 pc Acrylic Case
• 2 pcs X1, X10 Probe
• 1 pc touch pen
• 1 pc USB cable